SOLICITATION NOTICE
25 -- Carbon Fiber Cutting System
- Notice Date
- 5/22/2026 11:41:50 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333248
—
- Contracting Office
- ORNL UT-BATTELLE LLC-DOE CONTRACTOR Oak Ridge TN 37831 USA
- ZIP Code
- 37831
- Solicitation Number
- PR471273
- Response Due
- 6/2/2026 1:00:00 PM
- Archive Date
- 06/02/2026
- Point of Contact
- Brittanie Mack-Brewster
- E-Mail Address
-
mackbrewstbc@ornl.gov
(mackbrewstbc@ornl.gov)
- Small Business Set-Aside
- NONE No Set aside used
- Description
- ORNL is requesting a quote for the same or domestic equivalent of a Carbon Fiber Cutting System with the below specifications and technical capabilities. FAR 52.211-6, Brand Name or Equal applies. Key custom features include: Custom-built to ORNL�s roll/core specs o Unwind (mother roll) core ID 10�, cardboard core, ~12� wide roll. o Rewind (product) core ID 3� on a custom aluminum spool, ~11� wide, with notched/keyway ends (machine must accept/drive/locate this spool correctly). Carbon-fiber-appropriate cutting system o Use tungsten carbide cutting edges or other edge suitable for durability when cutting carbon fiber (instead of the �Japanese tool steel� blades referenced generically for other applications). o Vendor to maintain extra blade sets in stock for the custom machine (supportability expectation). Waste handling different from the standard model behavior o Standard behavior described: scraped trim on each side is cut and re-rolled along with the good cuts. o ORNL requirement/customization: waste cannot be wound together with the good product; needs separate waste management, with the proposed custom approach being rewinding waste into separate waste roll(s) (one/both sides) or otherwise directing it separately. Adjustable slit width via knife/spacer arrangement o Width adjustment called out as required; Vendor proposed spacers between knives as the adjustment mechanism. Independent drives/controls o Cutter speed and winding speed independently controlled, each with its own motor, and adjustable feed rate (called out explicitly as a capability of the proposed configuration).
- Web Link
-
SAM.gov Permalink
(https://sam.gov/workspace/contract/opp/50c9d5207f264c44a96a89f527a13c33/view)
- Place of Performance
- Address: TN 37830, USA
- Zip Code: 37830
- Country: USA
- Zip Code: 37830
- Record
- SN07827057-F 20260524/260522230049 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |