Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF MARCH 26, 2026 SAM #8886
SOLICITATION NOTICE

66 -- Safety Air Monitoring Replacement Gas Chromatograph (GC) Phase III

Notice Date

3/24/2026 1:53:20 PM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

334516 — Analytical Laboratory Instrument Manufacturing
 

Contracting Office

W6QM MICC-DUGWAY PROV GRD DUGWAY UT 84022-5000 USA
 

ZIP Code

84022-5000
 

Solicitation Number

W911S6-26-Q-A011
 

Response Due

3/31/2026 9:00:00 AM
 

Archive Date

04/15/2026
 

Point of Contact

Nneka Okeke-Stubbs, Phone: 4358312748, Amy Eilerts, Phone: 4358312103
 

E-Mail Address

nneka.okeke-stubbs.civ@army.mil, amy.m.eilerts.civ@army.mil
(nneka.okeke-stubbs.civ@army.mil, amy.m.eilerts.civ@army.mil)
 

Description

A Gas Chromatograph (GC) instrument is needed for air monitoring in replacement of MINICAMS instruments. Procure one GC instrument with the following specifications: Detector capable of detecting halogen containing chemical agents and compounds that also do not contain a phosphorous or sulfur element. Detector is an alternate to existing Flame Photometric Detector (FPD) and Flame Ionization Detector (FID) Chromatographic column: MXT-1701 phase Air sampling Quick Change Trap Module with flow rate through the trap of at least 500mL/min External mass flow controller, ability to capture the flow meter readings Oven programmable from ambient to 400? Cycle time from injection to injection of 15 minutes or less Visible and audible alarms for system faults and sample concentration detections Integrated GC engine, NUMAVIEW with touchscreen display, integrated processor, and storage. Data logging. Ability to capture instrument set points and measured values such as: sample flow, temperatures, pressures, calibration, concentration, injection type � calibration, service, sample, etc. Data captured locally with the ability to retrieve and use for other reporting or calculating of sample data. Automatic calibration feature. Calibration of the instrument using an averaged single point or multi-point calibration curve. Capable of calibrating and obtaining sample concentrations using the onboard integration engine, and values displayed on the graphical user interface. Heated exhaust to prevent expulsion of water. Detector exhaust must expel water in gas/vapor form elimination water drip from the instrument detector. Sample bypass capability. Ability for continuous sample flow at inlet in a bypass state. A minimum flow of 500mL/min required for bypass capability. GC approximate dimensions - 17� x 11� x 8.5� (width x height x depth) Instrument weight approximately 25 pounds Shipping: Delivery shall be completed by 30 September 2026 or upon customer notification.
 

Web Link

SAM.gov Permalink
(https://sam.gov/workspace/contract/opp/be3da5dd8b324349a1765ea5e1d2079e/view)
 

Place of Performance

Address: Dugway, UT 84022, USA

Zip Code: 84022

Country: USA
 

Record

SN07755739-F 20260326/260324230053 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |