SOLICITATION NOTICE
38 -- Woodcock Bat-Wing Brush Hog Mower Attachment
- Notice Date
- 3/7/2025 11:59:42 AM
- Notice Type
- Presolicitation
- NAICS
- 333111
— Farm Machinery and Equipment Manufacturing
- Contracting Office
- W072 ENDIST PITTSBURGH PITTSBURGH PA 15222-4198 USA
- ZIP Code
- 15222-4198
- Solicitation Number
- W911WN25Q0186
- Response Due
- 3/11/2025 2:00:00 PM
- Archive Date
- 03/26/2025
- Point of Contact
- Lisa Bisnette, Phone: 4123957556, Leanna Lesefka, Phone: 4123957549
- E-Mail Address
-
lisa.d.bisnette@usace.army.mil, leanna.c.lesefka@usace.army.mil
(lisa.d.bisnette@usace.army.mil, leanna.c.lesefka@usace.army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Specification for Bat-Wing Brush Hog Mower Attachment 1.0 GENERAL REQUIREMENTS. These specifications establish the requirements to furnish a new bat-wing brush hog mower attachment for a John Deere model 5200 tractor (40 to 100 PTO hp). The bat-wing brush hog mower attachment will include a hydraulic kit for raising and lowering. 1.1 A new bat-wing brush hog mower attachment will be delivered to Woodcock Creek Lake with the following salient characteristics: Compatible tractor horsepower shall be between 40 hp and 100 hp. Splitter gearbox horsepower � 160 hp Center and wings gearbox horsepower � 100 hp Input shaft gearbox � 1 3/8�, 6 spline Output shaft gearbox � 1 �� Cutting capacity diameter � 1 �� minimum. Hitch weight � 1,000 lbs maximum Machine weight � 3,500 lbs maximum Hitch types � LP Performance hitch and swivel hitch Hitch jack � Standard 2,000 lbs Cutting width � 12�- 0� Overall cutter width � 12�- 7� Cutting height � 1 �� to 12� Lift hydraulics � Left and right mower decks are hydraulicly operated. Wing folding hydraulics � Left and right mower decks are hydraulicly operated. Wing flex while operating � Max. 20 degrees down, can float up as needed as long as the wheels are still on the ground. Wing transport protection � Wing transport locks. Wing deck skid shoes � 1 replaceable per wing. Center deck skid shoes � 2 replaceable shoes. Blade overlap � 6� Stump jumper/ blade holder � Round dish shaped pan, reinforced with 1� x 3 �� blade bar. Front and rear guards � Single chain. Input driveline � Category 4 with constant velocity u-joint. Intermediate and wing drivelines � Category 3 with slip-clutch. Number of wheels � 4: two on transport axle and one on each wing axle. Transport axle � Spring-cushioned lift cylinder. Signal lights � LED. 7 pin connector � SAE J560 pin configuration. 2.0 SUBMITTALS. The vendor is required to submit one (1) copy of the Operation and Maintenance Manual, Owner�s Manual, and Spare Parts List to the delivery location. 3.0 Reserved
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/9d3d7783107649969c43b1915016ef4e/view)
- Record
- SN07365147-F 20250309/250307230035 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |